NARAKU converter disc with 2 different guide slots, once linear and once NARAKU Snap In guide. The guide slots of most converters have a radius (curve) which leads to a not exactly performance-optimized but rather on driving comfort designed power transmission. With the possibility to choose between 2 different gradients, one can again influence the acceleration behavior according to the available engine power. However, this option is only marginally noticeable in city traffic and is more a feature for the race track. Important for the everyday user is the straight design of the slots to bring the available drive power without losses to the rear wheel.

Important note: The pins from the original converter must not be larger than 6mm and / or must not be worn in. The Naraku tuning converter is a milled part with minimum tolerances to allow exact and more direct switching of the converter. If the original converter is already worn, the Naraku converter can no longer be installed. In this case, we recommend in the course of assembly to use the converter BT12279 or NK900.40.
Our tip: Order a new converter at the same time! Then the complete drivetrain is overhauled.