![turn signal set front+rear Moto Nostra smoked (2014-2018) dynamic LED running light, daytime running light front + position light rear for Vespa Modern GTS 300 ie Touring 4V E3 11-13 [ZAPM45200]](images/mittel/Moto_Nostra_50297_1.jpg "turn signal set front+rear Moto Nostra smoked (2014-2018) dynamic LED running light, daytime running light front + position light rear for Vespa Modern GTS 300 ie Touring 4V E3 11-13 [ZAPM45200]")
The MOTO NOSTRA turn signals have individually controlled LEDs and thus produce a fully dynamic running light, as known from vehicles of the luxury class (eg Audi A7). The generated light effect is very pleasing and offers a pleasant change to conventional turn signals. As an additional feature, the front turn signals have a bright white daytime running light strip in a plasma look. At the rear, the same technology is used as a position light.
The set comes with an adapter plug (BGM6606BL18). This extends the wiring of the rear light and picks up there at the same time the current for the standard position lights not available. The extension also allows the cables to be routed in the bead below the taillight.
Important note :
When converting from incandescent lamps to LEDs in vehicle turn signals it may, due to the different resistance values of the bulbs and / or the factory installed relays, under unfavorable circumstances to malfunctions. To avoid this from the outset, in case of doubt, an LED suitable flasher relay such as the article NK390.60 should be used.
The set comes with an adapter plug (BGM6606BL18). This extends the wiring of the rear light and picks up there at the same time the current for the standard position lights not available. The extension also allows the cables to be routed in the bead below the taillight.
Important note :
When converting from incandescent lamps to LEDs in vehicle turn signals it may, due to the different resistance values of the bulbs and / or the factory installed relays, under unfavorable circumstances to malfunctions. To avoid this from the outset, in case of doubt, an LED suitable flasher relay such as the article NK390.60 should be used.
