Buzzetti puller for the pole wheel (rotor) of the alternator. Is required for work on the alternator, underlying components and when changing crankshafts and crankshaft bearings.

The pole wheel puller is screwed onto the rotor and tensioned with the help of the forcing screw. If the pole wheel does not loosen under pressure, it can be carefully repaired by lightly tapping the puller's jacking screw with a hammer.

You do not need many special tools on the scooter. But this is one of the most important for the engine. Please check the size of the forcing-off thread on the rotor before ordering. This puller has a M32x1.5mm right-hand thread. Suitable for maxi-scooters with 125-150cc Honda 4-stroke engine.