![cylinder kit Malossi MHR Team Replica Modular 79cc 50mm for Derbi Senda 50 R X-Treme 2006 E2 (D50B) [VTHSR1D1A/ E1A/ F1A]](images/mittel/M.3113564_1.jpg "cylinder kit Malossi MHR Team Replica Modular 79cc 50mm for Derbi Senda 50 R X-Treme 2006 E2 (D50B) [VTHSR1D1A E1A F1A]")
The currently most powerful replica cylinder from Malossi for gear shift moped with D50B0 / D50B1 engine. The MHR Team Replica with modular cylinder head comes with 78.5cc capacity. Absolute high-end technology and workmanship. This cylinder should only be run together with other components for racing. Larger carburettor, reinforced crankshaft and appropriate clutch parts should not be an extension, but a basic requirement to mount this Malossi cylinder.
The 80cc Malossi MHR Team Replica doesn't rev quite as high as some competitors, but due to the timing it has enormous torque from comparably lower revs, making it an absolute acceleration and cornering weapon. The modular cylinder head ensures optimum heat dissipation and thus the best thermal properties.
To be used with standard stroke crankshaft.
Important note: For Euro4 models from 2018 onwards, the adapter for the temperature sensor NK103.78 is required.
The 80cc Malossi MHR Team Replica doesn't rev quite as high as some competitors, but due to the timing it has enormous torque from comparably lower revs, making it an absolute acceleration and cornering weapon. The modular cylinder head ensures optimum heat dissipation and thus the best thermal properties.
To be used with standard stroke crankshaft.
Important note: For Euro4 models from 2018 onwards, the adapter for the temperature sensor NK103.78 is required.
