High Friction Polini clutch plates as a set of 4 reinforced clutch springs. Suitable for geared mopeds with Minarelli AM, Generic, KSR Moto, Keeway, Motobi, Ride, 1E40MA, 1E40MB engine.
Normally, only 4 friction plates and 3 steel discs are used in the standard clutch. In this High Friction Kit, the friction plates and steel discs were made slightly thinner, so that two additional discs can be added. This increases the friction surface by approx. 20%. There is less slippage and better coefficients of friction.
Normally, only 4 friction plates and 3 steel discs are used in the standard clutch. In this High Friction Kit, the friction plates and steel discs were made slightly thinner, so that two additional discs can be added. This increases the friction surface by approx. 20%. There is less slippage and better coefficients of friction.