Clutch facings are a very important link between the engine and the gearbox, and a well-functioning clutch is essential for driving pleasure, safety and performance.The only logical consequence of BGM was the production of our own clutch facings.
Produced exactly according to our specifications, we have managed to use a very high quality organic rubber mixture that is pressure and temperature stable, but still wear resistant. All this combined with a very good grip to have always the full torque on the rear wheel. So even with very high spring force used, the separation distance is short because the material is not as soft and compressible as that of other manufacturers.
1x steel disc with notch 1.5mm 2x steel disc without notch 1.5mm 1x steel disc (base disc) 2.0mm
We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as lubricant for these clutch linings.
Produced exactly according to our specifications, we have managed to use a very high quality organic rubber mixture that is pressure and temperature stable, but still wear resistant. All this combined with a very good grip to have always the full torque on the rear wheel. So even with very high spring force used, the separation distance is short because the material is not as soft and compressible as that of other manufacturers.
The pads can be used in all engines, from standard to the fully exhausted engine setup.
TIP: It is best to renew the steel discs at the same time. These are often discoloured and distorted and thus prevent the clutch from functioning properly. To complete the clutch package, 4 steel plates are required (see accessories).
We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as lubricant for these clutch linings.
