A complete revision set for the actuation cables of almost all classic vesps, this should not be missing in any glove box!
em>AI-translation>/em>/sub>
For the first time we can offer the otherwise very expensive individual parts as a cost-effective complete set. All in a fantastic quality. Manufactured by a supplier for the Japanese motorcycle industry, the details of the set are impressive.
The clamping screws for the cables have an internal plate like in the original, which protects the cable from being crushed or even sheared off.
Also included are the very important end sleeves which are necessary as abutments for the Bowden cable outer sheath of the cables on the older models before the PX series.
The saving compared to the single parts is more than 10Euro!
The 27 pcs. Set contains in detail:
2x | bulb nipple adapter Ø=8mm |
2x | Pear nipple adapter Ø=9mm |
4x | setting screw M5x20 |
3x | setting screw M5x30 |
1x | setting screw M7x20 |
5x | end sleeve Ø=6,2 |
1x | end sleeve Ø=8,2 |
2x | clamping nipple Ø=4mm (Gas) |
2x | clamping nipple Ø=5,5mm (gas) |
5x | Clamp nipple Vespa (shift notch/clutch) |
em>AI-translation>/em>/sub>
