Spacer fan wheel cover -BGM PRO- V50 1st series (V5A1T1001 -92876, V5SA1T1001 -15325) - 3.00mm

The pole wheel of the V50, PV125, ET3 etc. is flatter than that of the later PK models.
If you rebuild your engine to the modern ignition technology (or replace the whole engine) you will not get the old original fan wheel cover mounted.

This is where our spacer comes in handy to distance the cover from the pole wheel.
Just put it between the cover and the engine case and tighten it together with the cover.

Ideal also for a conversion to Vespatronic / Vespower.

(TW310122)