Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on stiff stock intake manifolds coming with the vehicle or on several tuning intake manifolds. Generally we show the sleeve diameter of the carb flange in the title of the carb. In addition, the connection widths for intake manifolds can be found on matching intake manifolds.
Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depending on level of tune.
Delivered pre-set up with additional larger main jet. Depending on tune, the main jet will need to be changed.
Especially designed for solid intake manifolds. Manual choke lever, with 2 different intake manifolds. Plastic air filter connection.
Main Jet: 70 (Installed) Additional 95 Jet Supplied
Idle Jet: 25
Intake Manifold Connection Fitment: 23/24mm
Air Filter Connection Fitment: 32/35mm
Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depending on level of tune.
Delivered pre-set up with additional larger main jet. Depending on tune, the main jet will need to be changed.
Especially designed for solid intake manifolds. Manual choke lever, with 2 different intake manifolds. Plastic air filter connection.
Main Jet: 70 (Installed) Additional 95 Jet Supplied
Idle Jet: 25
Intake Manifold Connection Fitment: 23/24mm
Air Filter Connection Fitment: 32/35mm